Spansion S25FL064P0XBHIS23 BGA(25) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMC24BGJ, FVE4ASM24BGB, FVE4ASMC24BGJ, FVE4ASM24BGB | FVE4ASMC24BGJ, FVE4ASM24BGB | FVE4ASMC24BGJ, FVE4ASM24BGB, FVE4ASMC24BGJ, FVE4ASM24BGB |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMC24BGJ, FVE4ASM24BGB, FVE4ASMC24BGJ, FVE4ASM24BGB | FVE4ASMC24BGJ, FVE4ASM24BGB | FVE4ASMC24BGJ, FVE4ASM24BGB, FVE4ASMC24BGJ, FVE4ASM24BGB |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | CMOS Serial Flash Memory |
| Device Size: | 64M-BIT |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 00000000-007FFFFF | 00000000-007FFFFF |
| OTP locations 114h-213h | R/W | Yes | 00800000-008000FF | 00800000-008000FF |
| OTP locations 216h-2FFh | R/W | Yes | 00800100-008001E9 | 00800100-008001E9 |
| Default Algorithm Range | — | — | 00000000-007FFFF | 00000000-007FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. The device has 128 equal sectors with 64K byte each. This device contains thirty 16-byte and one 10-byte OTP regions that can be individually locked. The OTP regions are located at address range [800000h-8001E9h] in the Data Pattern. Device OTP regions memory address range 114h-213h is mapped at [800000h-8000FFh] in the Data Pattern. Device OTP regions memory address range 216h-2FFh is mapped at [800100h-8001E9h] in the Data Pattern. OTP regions can be permanently locked by setting OTP Memory Region Lock Byte under Device Config > Configure. Once BPNV bit under Device Config > Configure is set BP0 BP1 and BP2 will become volatile and are not read anymore. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8389098 |
|---|---|
| Manufacturer | Spansion |
| Packages | BGA(25) |
| Part Number | S25FL064P0XBHIS23 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |