+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Spansion S25FS128SAGMFV101 SOIC(8) Device

Spansion S25FS128SAGMFV101 SOIC(8) Device

Adapters for Automated Programmers

6th Gen 7th Gen 9th Gen
FASMR08SHL, FASM08SHL, FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.) WASM08SHA (obs.), WX4ASMR08SHA (obs.), LX4ASM08SHL

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SMR08SHA (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.) WASM08SHA (obs.), WX4ASMR08SHA (obs.), LX4ASM08SHL

Adapters for Engineering Programmers

6th Gen 7th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SMR08SHA (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type: Flash Memory
Device Size: 256 Mbyte
Algorithm Programming Method: Standard SPI

Memory Organization:

Memory Type

Attributes(*)

 Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Flash Memory Array [R/W/E] [Yes] [000_0000-0FF_FFFF] [000_0000-0FF_FFFF]
Reserved [R] [No] [000_0000-000_000F] [100_0000-100_000F]
Lock Bits [R/W] [No] [000_0010-000_001F] [100_0010-100_001F]
OTP Region [R/W] [No] [000_0020-000_03FF] [100_0020-100_03FF]
Password [R/W] [No] [000_0000-000_0007] [100_0400-100_0407]
Default Algorithm Range — — 000_0000-0FF FFFF 000_0000-0FF FFFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The TBPARM OTP bit will be programmed first. You may not mix a top boot device with a bottom boot device.
The correct password value located in the range [2000400h-2000407h] may be read only after it is programmed
and before the Password Mode has been selected by programming the Password Protection Mode bit to 0 in the
ASP Register (ASP[2]).
The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be
programmed and data in this region will not be shown in the Buffer Editor. OTP Lock bits are located.

‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

16778248
Manufacturer

Spansion
Packages

SOIC(8)
Part Number

S25FS128SAGMFV101
Set programming

Yes
Vcc(program)

3.6
Package