+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Spansion S25FS128SAGNFV000 WSON8(8) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 256 Mbit
Algorithm Programming method: Standard Single/Double/Quad Mode SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 00FF_FFFF 0000_0000 – 00FF_FFFF
OTP sector R/W N0 0000_0000 – 0000_03FF 0100_0000 – 0100_03FF
Password sector R/W N0 0100_0000 – 0000_0400 0100_0000 – 0100_0407
Default Algorithm Range 0000_0000 – 00FF_FFFF 0000_0000 – 00FF_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The TBPARM OTP bit will be programmed first. You may not mix a top boot device with a bottom boot device.
The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be
programmed and data in this region will not be shown in the Buffer Editor.
Each Group is devided into 64K Bytes of data. Boot sectors may only be locked in groups of 64K Bytes;
thus these sectors will make up 2 bits in a group (First two bits for bottom boot devices and Last two bits for top boot devices.)
‘OTP area is currently not supported.’.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

16778248

Manufacturer

Spansion

Packages

WSON8(8)

Part Number

S25FS128SAGNFV000

Set programming

Yes

Vcc(program)

3.6

Package