Infineon(Siemens) SAK-TC387QP-160F300S (3-Wire Programming) LFBGA(292) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR292LFBGD |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR292LFBGD |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | AURIX 32-Bit Single-Chip Microcontroller |
| Device Size: | 10 MByte PFlash Memory + 512 Kbytes DFlash Memory |
| Algorithm Programming Method: | DAP |
Memory Organization:
PFlash1 R/W/E Yes A030_0000 – A05F_FFFF 003C_0000 – 0077_FFFF PFlash2 R/W/E Yes A060_0000 – A08F_FFFF 0078_0000 – 00B3_FFFF PFlash3 R/W/E Yes A090_0000 – A09F_FFFF 00B4_0000 – 00C7_FFFF DFlash0 DF_EEPROM R/W/E Yes AF00_0000 – AF07_FFFF 00C8_0000 – 00D1_FFFF
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| PFlash0 | R/W/E | Yes | A000_0000 – A02F_FFFF | 0000_0000 – 003B_FFFF |
| DFlash0 DF_UCB | R/W/E | No | AF40_2000 – AF40_3FFF | 00D2_0000 – 00D2_27FF |
| Default Algorithm Range | — | — | A000_0000 – AF07_FFFF | 0000_0000 – 00D1_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | This device selection requires a data file formatted using the image format tool under Device->Image_Format.Alternatively Read will also return the data from a programmed sample in the correct format.Please contact BP Microsystems for information on how to use the image format tool. |
| 3. | This algorithm only supports UCB16-UC25.Dual Password UCB Protection. UCBs are in delivery confirmation state by default. |
| 4. | When reading a blank logical sector there may be bit errors due to unprogrammed ECC.Thus it is recommended to program the entire PFlash and DFlash (DF_EEPROM). |
| 5. | Simple serialization is not supported. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2940223488 |
|---|---|
| Manufacturer | Infineon(Siemens) |
| Packages | LFBGA(292) |
| Part Number | SAK-TC387QP-160F300S(3-Wire Programming) |
| Vcc(program) | 1.3 |