STMicroelectronics STM32F427VGT6 (LX4ASMR100LQFYA) LQFP(100) Device
Adapters for Automated Programmers
| 9th Gen |
| LX4ASMR100LQFYA |
Adapters for Manual Programmers
| 9th Gen |
| LX4ASMR100LQFYA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU with Flash |
| Device Size: | 1 MByte |
| Algorithm Programming Method: | Bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 4000000-407FFFF | 8000000-80FFFFF |
| Default Algorithm Range | — | — | 4000000-407FFFF | 8000000-80FFFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Please set Option Bytes under Device > Configure. If RDP protection is set to level 1(None AAh Non CCh) all flash memory cannot be read. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails. Stand alone operation might fail if device was programmed with executable code. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | LQFP(100) |
| Part Number | STM32F427VGT6 |
| Set programming | Yes |
| Vcc(program) | 3.3 |