AMD 87C51 DIP(40) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASM48D300, FASM48D600	FASM48D300, FASM48D600

Adapters for Manual Programmers

6th Gen	7th Gen	9th Gen
FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4ASMR44TQFH (repl.), WX4ASM44PE (repl.)	FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4ASMR44TQFH (repl.), WX4ASM44PE (repl.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.), LX4ASMR44TQFH (repl.), WX4ASM44PE (repl.)	LX4ASMR44TQFH, WX4ASM44PE

Adapters for Engineering Programmers

6th Gen	7th Gen
FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4ASMR44TQFH (repl.), WX4ASM44PE (repl.)	FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), LX4ASMR44TQFH (repl.), WX4ASM44PE (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Microcontroller with EPROM.Default buffer value’ in BUFFER/OPTIONS must be set to 255(FFh).The EncryptBuf is used on read back. The encryption array itself cannot be read out.If the Encryption array has been programmedEncryptBuf must contain the correct encryption key to read the device properly.You must select the appropriate security mode under DEVICE/OPTIONS to operate the secure command.Two levels of security are available on this chip:If level2 is set further programming of EPROM is disabled.If level3 is set verify of EPROM is disabled.!!!Note: If both Encryption and Secure functions are required they must be done together byenabling both the ‘Encrypt after programming’ and ‘Secure after programming’ options underDEVICE/OTPIONS. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	4096
Manufacturer	AMD
Packages	DIP(40)
Part Number	87C51