Atmel ATtiny441-SSU SOIC(14) Device
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | Microcontroller |
| Device Size: | 8 Kbyte |
| Algorithm Programming Method: | High Voltage Serial Programming |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| [FLASH] | [R/W/E] | [Yes] | [0x0000-0x0FFF] | [0x0000-0x0FFF] |
| [EEPROM] | [R/W/E] | [Yes] | [0x00 0xFF] | [0x00 0xFF] |
| Default Algorithm Range | — | — | [0x0000-0x10FF] | [0x0000-0x10FF] |
Erase will erase both Flash and EEPROM.In Device Configure if CALIBRATION is set ENABLE the Calibration Byte canbe programmed into any address [0000h-21FFh] in the Flash Memory or EEPROM.The address is set in CALIBRATION ADDRESS option.CAL BYTE ADDRESS option is to set address 0h in the signature row high bytefor 8.0MHz internal RC Oscillator Calibration.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the device against data in the bufferthus COMPARE may fail if Calibration is enabled.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8704 |
|---|---|
| Manufacturer | Atmel |
| Packages | SOIC(14) |
| Part Number | ATtiny441-SSU |
| Vcc(program) | 5 |