Microchip Technology ATtiny1607-MN QFN(24) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR24QFNZT, FVE4ASMR24QFNZT | FVE4ASMR24QFNZT |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR24QFNZT, FVE4ASMR24QFNZT | FVE4ASMR24QFNZT |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | tinyAVR Microcontroller |
| Device Size: | 8 KByte Flash with 128 Byte EEPROM |
| Algorithm Programming method: | UPDI |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| EEPROM Memory | R/W/E | Yes | 0000_1400 – 0000_147F | 0000_1400 – 0000_147F |
| Flash Memory | R/W/E | Yes | 0000_8000 – 0000_9FFF | 0000_8000 – 0000_9FFF |
| Default Algorithm Range | — | — | 0000_1400 – 0000_9FFF | 0000_1400 – 0000_9FFF |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.Special Device Considerations:The Fusebytes and Lockbits Registers are set under Device > Configure.
| Option | Description |
| WDTCFG | Watchdog Configuration. The Watchdog Timer (WDT) is a system function for monitoring correct program operation. |
| BODCFG | BOD Configuration. The Brownout Detector (BOD) monitors the power supply and compares the voltages. |
| OSCCFG | Oscillator Configuration. The actual frequency of the OSC20M is determined by the Frequency Select bits. |
| SYSCFG0 | System Configuration 0. Modifying SYSCFG0[3:2] bits from default will prevent further access with this algorithm.Programmed in SECURE. |
| SYSCFG1 | System Configuration 1. |
| APPEND | Application Code End. These bits set the end of the application code section in blocks of 256 bytes. |
| BOOTEND | Boot End. These bits set the end of the boot section in blocks of 128 bytes. |
| LOCKBIT | Lock Bits. When the part is locked UPDI cannot access the system bus so it cannot read out anything but CSspace.Programmed in SECURE. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 40960 |
|---|---|
| Manufacturer | Microchip Technology |
| Packages | QFN(24) |
| Part Number | ATtiny1607-MN |
| Set programming | Yes |
| Vcc(program) | 3.3 |