Micron MTFC4GACAECN-1M WT BGA(153) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.) |
Adapters for Manual Programmers
| 8th Gen |
| FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASMC153FBGEA, FVE4ASM153FBGE (obs.) |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | eMMC |
| Device Size: | See below |
| Algorithm Programming Mode: | SDR |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Boot Area Partition 1 | R/W/E | No | 0_0000_0000 – 0_001F_FFFF | 0_0000_0000 – 0_001F_FFFF |
| Boot Area Partition 2 | R/W/E | No | 0_0000_0000 – 0_001F_FFFF | 0_0020_0000 – 0_003F_FFFF |
| User Data Area | R/W/E | Yes | 0_0000_0000 – 0_E8FF_FFFF | 0_0040_0000 – 0_E93F_FFFF |
| Default Algorithm Range | — | — | 0_0000_0000 – 0_E8FF_FFFF | 0_0080_0000 – 0_E93F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Default Device Size: | 4 GByte |
| 2. | Device size after enhancing the full user area: | 1864 MByte |
| 3. | Total number of sectors: | 7634944 |
| 4. | Write Protect Group Size: | 8 MByte |
| 5. | High Capacity Write Protect Group Size: | 8 MByte |
| 6. | MAX_ENH_SIZE_MULT: | E9h |
| 7. | Serialization Supported: | No |
| 8. | RPMB partition is not currently supported by this algorithm. | |
| 9. | General Purpose Partitions 1-4 if any are mapped directly after the boot partitions. This is followed by the rest of the User Data Area. | |
| 10. | Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. | |
| 11. | It is recommended to adjust the ‘High Device Address’ under Device->settings to match the end of the loaded data file(s). | |
| 12. | Each physical sector on the device has 512 bytes. | |
| 13. | If any partition is included in the erase operation that entire partition will be erased | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 3913285632 |
|---|---|
| Manufacturer | Micron |
| Packages | BGA(153) |
| Part Number | MTFC4GACAECN-1M WT |
| Set programming | Yes |
| Vcc(program) | 3.3 |