Microchip Technology PIC16F15323-E/SL SOIC(14) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR14SC, FVE4ASM14SC, FVE4ASM14SC, FVE4ASMR14SC | FVE4ASM14SC, FVE4ASMR14SC |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR14SC, FVE4ASM14SC, FVE4ASM14SC, FVE4ASMR14SC | FVE4ASM14SC, FVE4ASMR14SC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.
| Device Type: | Microcontroller |
| Device Size: | 3.5 KByte Program Flash Memory |
| Algorithm Programming Method: | In-Circuit Serial Programming (ICSP) interface |
| Serialization Supported: | Yes |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Flash Memory | R/W/E | Yes | 0000h – 07FFh | 0000h – 07FFh |
| Default Algorithm Range | — | — | 0000h – 07FFh | 0000h – 07FFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Data pattern requires a 14-bit format for Program Flash memory. | ||||
| 2. | Erasing the device will erase Program Memory and Data Memory along with the Configuration and ID bits. | ||||
| 3. | The ID locations are addressed in the Data Pattern at [10000h-10007h].It is recommended by manufacturer that the user use only the seven Least Significant Bits of eachID locations and the remaining bits are masked to 1s during programming. | ||||
| 4. | Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)][10010h(LSB)-10011(MSB)] [10012h(LSB)-10013h(MSB)] [10014h(LSB)-10015(MSB)] and [10016h(LSB)-10017h(MSB)].
| 5. |
IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern. |
| ||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(14) |
| Part Number | PIC16F15323-E/SL |
| Vcc(program) | 4 |