Microchip Technology PIC16F1787T-E/P DIP(40) Device

Adapters for Manual Programmers

9th Gen

FVEG4SM40DB

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Memory Organization:

Device Type:	8-bit Analog Flash Microcontroller
Device Size:	8 KW Flash Memory and 256 Bytes Data EEPROM

Memory Type	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	0000 – 1FFF	0000 – 1FFF
256-Byte Data EEPROM	R/W/E	F000 – F0FF	F000 – F0FF

Special Device Considerations:

Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words!. The Calibration words are skipped during all device operations.. The ID locations are addressed in the Data Pattern at [10000h-10007h] It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID location and the remaining bits are masked to 1s during programming.Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)].IDs and Configuration may be set under Device > Configure or from the above-mentioned addresses in Data Pattern.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Microchip Technology
Packages	DIP(40)
Part Number	PIC16F1787T-E/P
Vcc(program)	5