+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Renesas R7F7016463AFP-C(Custom02) QFP(144) Device

Renesas R7F7016463AFP-C(Custom02) QFP(144) Device

Adapters for Automated Programmers

8th Gen 9th Gen
FVE2ASMR144QFA, FVE2ASMR144QFA FVE2ASMR144QFA

Adapters for Manual Programmers

8th Gen 9th Gen
FVE2ASMR144QFA, FVE2ASMR144QFA FVE2ASMR144QFA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: [This is a custom algorithm Please use RPI file only. This algorithm has 32-bit precision in the CodeFlashDataFlash region.]

Device Type: 32-bit G3KH CPU core
Device Size: 3072kBytes Code Flash + 32KBytes Code Flash (Extended User Area) + 96KBytes Data Flash
Algorithm Programming Method: 3-Wire Serial I/O Mode

Memory Organization:

Memory Type

Attributes(*)

 Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Code Flash Memory R/W/E Yes 0000 0000 – 002F FFFF 0000 0000 – 002F FFFF
Code Flash (Extended User Area) Memory R/W/E Yes 0100 0000 – 0100 7FFF 0100 0000 – 0100 7FFF
Data Flash Memory R/W/E Yes FF20 0000 – FF21 7FFF FF20 0000 – FF21 7FFF
Default Algorithm Range — — 0000 0000 – FF21 7FFF 0000 0000 – FF21 7FFF
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Erase function for a Blank secured device is not supported.

1. OPBT0-OPBT7 options can be programmed compared read and verified. OPBT8-OPBT12 options can be programmed but cannot be compared read and verifiedErased. Device specifications provide details on how this CRC is calculated. 2. it is NOT possible to read out the ICU-M configuration once the ICU-M is active. 3. Erase function for a Blank secured device is not supported. 4. The Security Flag and SPD can be set in the Secure command. 5. Security for this device is verified after performing Secure operation. 6. In order to program this Byte please enable Secure. 7. Set bit 5 to 0 to disable Erase set bit 6 to 0 to disable Program set bit 7 to 0 to disable Read.

8. Bits 4 to 0 are reserved and should be set to 1s. Bits 5 6 and 7 cannot be erased and once bit 5 is programmed to 0 the whole chip is secured. 9. Serialization is not supported. 10. Once the SPD is enabled and programmed.The programmer cannot access the device again. 11. Enable Validate ICU to program OPBT8-12

RPI Considerations:Once Device is Programmed with ICU/ID code it cannot be accessed again with different ID.Security type cannot be programmed if ID is programmed To secure the device with IID add SPD setting in the RPi file.To Program the Extend OPBTS.You need to set the Validate ICU setting in RPI file. ‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

4280385536
Manufacturer

Renesas
Packages

QFP(144)
Part Number

R7F7016463AFP-C
Vcc(program)

3.3