NXP Semiconductors MK28FN2M0ACAU15R MAPBGA(225) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMC210BGA |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMC210BGA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 2MB flash |
| Algorithm Programming Method: | Serial Wire Debug(SWD) |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | Program Flash Memory. | R/W/E | Yes | 0000 0000 – 001F FFFF | 0000 0000 – 001F FFFF |
| Default Algorithm Range | — | — | 0000 0000 – 001F FFFF | 0000 0000 – 001F FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: Addresses [0x40C] is Flash security byte There are two security bits(bit 0 and bit 1) and two Mass erased bits(MEEN) bit 5 and bit 4 in FSEC. If device secured and Mass erase is disabled(10b). Device can not erase any more. To program the Flash configuration area [0x408 – 0x40C] the Secure command needs to be enabled. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2097152 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | MAPBGA(225) |
| Part Number | MK28FN2M0ACAU15R |
| Vcc(program) | 1.2 |