Spansion S99-50263 SOIC(16) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR16SD, FASM16SD, FASM16SE, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S | FX4ASMR16SD, FX4ASM16SD, FASMR16SD, FASM16SD, FASM16SE, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, WX4ASM16SD (repl.), WX4ASMR16SD (repl.) | WX4ASM16SD, WX4ASM16SE, WX4ASMR16SD |
Adapters for Manual Programmers
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR16SD, FSM16SD, FSM16SE, FSM16SB, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FASMR16SD, FASM16SD, FASM16SE, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.) | FX4SMR16SD, FX4SM16SD, FSMR16SD, FSM16SD, FSM16SE, FSM16SB, FSM28SB, FSM28SH, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FSM20SB, FSM18S, FX4ASMR16SD, FX4ASM16SD, FASMR16SD, FASM16SD, FASM16SE, FASM16SB, FASM16S, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FASM20SB, FASM18S, FSM30S (obs.), WX4ASM16SD (repl.), WX4ASMR16SD (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 64M-BIT CMOS SERIAL Flash MEMORY. This algorithm uses Quad I/O High Performance Read and Quad Page Program mode to Program and Verify/Read/Compare the device. The device has 64 equal sectors with 64K byte each. This device contains thirty 16-byte and one 10-byte OTP regions that can be individually locked. The OTP regions are located at address range [800000h-8001E9h] in the Data Pattern. Device OTP regions memory address range 114h-213h is mapped at [800000h-8000FFh] in the Data Pattern. Device OTP regions memory address range 216h-2FFh is mapped at [800100h-8001E9h] in the Data Pattern. The first four 16-byte OTP [800000h-80003Fh] areas are programmed with the Specific User Data at the factory. OTP regions can be permanently locked by setting OTP Memory Region Lock Byte under Device > Configure. As the first four OTP regions [800000h-80003Fh] are programmed with the Specific User Data they are locked at the factory and cannot be unlocked. Once BPNV bit under Device > Configure is set BP0 BP1 and BP2 will become volatile and are not read anymore.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 8389098 |
|---|---|
| Manufacturer | Spansion |
| Packages | SOIC(16) |
| Part Number | S99-50263 |
| Set programming | Yes |
| Vcc(program) | 3.3 |