+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Renesas R7FA2E1A93CFM QFP(64) Device

Adapters for Automated Programmers

8th Gen 9th Gen
FVE4ASMR64QFPGC, FVE4ASMR64QFPGC FVE4ASMR64QFPGC

Adapters for Manual Programmers

8th Gen 9th Gen
FVE4ASMR64QFPGC, FVE4ASMR64QFPGC FVE4ASMR64QFPGC

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Renesas RA Family
Device Size: 128 KB Code Flash + 4kB Data Flash
Algorithm Programming Method: Device Boot Firmware w/ Two-wire UART

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Code Flash R/W/E Yes 0000_0000 – 0001_FFFF 0000_0000 – 0001_FFFF
Data Flash R/W/E Yes 4010_0000 – 4010_0FFF 4010_0000 – 4010_0FFF
Default Algorithm Range 0000_0000 – 4010_0FFF 0000_0000 – 4010_0FFF

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

1. Data Flash memory range requires a full image with no blank areas.
2. ID code mismatch will make ID check fail. ALGErase will erase all the memory including ID code and then fail at ID check where you can able to reprogram the device with New ID

Serialization is not supported.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

1074794496

Manufacturer

Renesas

Packages

QFP(64)

Part Number

R7FA2E1A93CFM

Set programming

Yes

Vcc(program)

3.3