Atmel AT45DB321C-CNU CASON(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR08CSON, FASM08CSON | FASMR08CSON, FASM08CSON |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR08CSON, FSM08CSON, FASMR08CSON, FASM08CSON, WASMR08CSON (repl.), WASM08CSON (repl.) | FSMR08CSON, FSM08CSON, FASMR08CSON, FASM08CSON, WASMR08CSON (repl.), WASM08CSON (repl.) | WASMR08CSON, WASM08CSON |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR08CSON, FSM08CSON, FASMR08CSON, FASM08CSON, WASMR08CSON (repl.), WASM08CSON (repl.) | FSMR08CSON, FSM08CSON, FASMR08CSON, FASM08CSON, WASMR08CSON (repl.), WASM08CSON (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 32-megabit DataFlash.Erase before programming must be enabled if the state of the deviceis uncertain. The device has a 128-byte Security Register. The first 64 bytes arethe one-time user programmable space and the remaining 64 bytes are factory programmed by Atmeland will contain a unique number for each device. The factory programmed data is fixed and cannotbe changed. The User Programmable Space is located in Buffer addresses [420000h-42003Fh]. Ifthe User Programmable Space is not blank Erase will fail on this area. The Sector ProtectionRegister can be set in Device Configure. The Security Register can be excluded from device operationsby setting Device Ranges to 0h-41FFFFh.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Package | |
| Packages | CASON(8) |
| ByteWidth | AT45DB321C-CNU (ID=2700h) |
| VccProgram | 8-bit Bytes |
| VppProgram | 4325504 |
| ElectricalErase | 3.3 |