Atmel AT49F080 TSOP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T | FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM40TC, FXSM40TF, FSM40TF, FXSM40TA, FSM40T, FSM40TB, FSM56TB, FSM48T, FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T, FSM56T (obs.), WX4ASM40TF (repl.) | FSM40TC, FXSM40TF, FSM40TF, FXSM40TA, FSM40T, FSM40TB, FSM56TB, FSM48T, FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T, FSM56T (obs.), WX4ASM40TF (repl.) | WX4ASM40TF |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM40TC, FXSM40TF, FSM40TF, FXSM40TA, FSM40T, FSM40TB, FSM56TB, FSM48T, FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T, FSM56T (obs.), WX4ASM40TF (repl.) | FSM40TC, FXSM40TF, FSM40TF, FXSM40TA, FSM40T, FSM40TB, FSM56TB, FSM48T, FXASM40TF, FASM40TF, FXASM40TA, FASM40T, FASM56T, FASM48T, FSM56T (obs.), WX4ASM40TF (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The address range of the boot block is 00000h-03FFFh. Once the boot block lockoutfeature is enabled (Device/Configure) it is permanently set (OTP). However duringerasing and programming the chip the lockout feature is temporarily disabled so thecontents of the boot block can still be changed by using the device programmer.Erasing the boot or main block will erase both blocks.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | SOIC(44) TSOP(40) |
| Part Number | AT49F080 |
| Set programming | Yes |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT49F080 (ID=23h) |
| VppProgram | 1048576 |
| ElectricalErase | 5 |