Atmel AT49LV002-90TC TSOP(32) Device

Adapters for Automated Programmers

8th Gen	9th Gen	Flashstream
FVE4ASMR32TSA, FVE4ASMR32TSA	FVE4ASMR32TSA	FVE4ASMR32TSA, FVE4ASMR32TSA

Adapters for Manual Programmers

8th Gen	9th Gen	Flashstream
FVE4ASMR32TSA, FVE4ASMR32TSA	FVE4ASMR32TSA	FVE4ASMR32TSA, FVE4ASMR32TSA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	2M-bit Flash
Device Size:	2 Mbit

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 0003_FFFF	0000_0000 – 0003_FFFF
Boot Block	R/W/E	No	0000_0000 – 0000_3FFF	0000_0000 – 0000_3FFF

Default Algorithm Range	—	—	0000_0000 – 0003_FFFF	0000_0000 – 0003_FFFF

Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The address range of the boot block is 00000h-03FFFh. The entire chip must be erased and programmed in order to erase and program the boot block. Other blocks can be erased and programmed separately. Once the boot block lockout feature is enabled (Device/Configure) it is permanently set.However when erasing and programming the entire chip the lockout is temporarily disabled so the contents of the boot block can still be changed by the device programmer.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Vcc(program)	3.3
Packages	TSOP(32)
Part Number	AT49LV002-90TC
Set programming	Yes
Package
8-bit Bytes
Bytes	0h-3 FFFFh
ByteWidth	AT49LV002-90TC (ID=7h)
VppProgram	262144
ElectricalErase	3.3