Atmel AT88SC0104C-SH SOIC(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) | FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SJA (repl.), WX4ASMR08SJA (repl.) | FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SJA (repl.), WX4ASMR08SJA (repl.) | WX4ASM08SJA, WX4ASMR08SJA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SJA (repl.), WX4ASMR08SJA (repl.) | FSMR08SJA, FSM08SJA, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SJA (repl.), WX4ASMR08SJA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 1 Kbit CryptoMemory(R).This device has a 1-Kbit EEPROM User Memory and a 2-Kbit configuration zone.The User Memory is divided into 4 zones of 32-bytes each.The User Memory Zones are mapped from 0-7Fh in the Buffer.The Configuration Zone is mapped from 80-17Fh in the Buffer. Reserved locations in the ConfigurationZone will not be programmed. To program the Configuration Zone please select one of the Secure optionsavailable with this algorithm.(1) CZ : This option will program only the Configuration Zone.(2) CZ&FAB : This option will program the Configuration Zone and will blow the FAB fuse.(3) CZ&FAB&CMA : This option will program the Configuration Zone and will blow the FAB and CMA fuses.(4) CZ&FAB&CMA&PER : This option will program the Configuration Zone and will blow the FAB and CMA and PER fuses.Once the device is initialized by setting security features in the Configuration Zonethe programmer will not be able to perform any other operation on the device.If Serialization is desired and the serial number is to be programmed into the Configuration Zonethen one of the Secure options must be selected.Answer to reset and FAB codes will always be programmed to buffer values.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | SOIC(8) |
| Part Number | AT88SC0104C-SH |
| Set programming | Yes |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT88SC0104C-SH |
| VppProgram | 384 |
| ElectricalErase | 5 |