Atmel AT89C51CC01UA-SLSUM PLCC(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44P, FASM44PF | FASM44P, FASM44PF |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM44PF, FSM84UP, FASM44P, FASM44PF, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash.In the 64KB buffer memory 32KB User Memory is mapped into 0x0000 – 0x7FFF2KB Data Memory (EEPROM) is mapped into 0xF000 – 0xF7FF and2KB Boot Memory is mapped into 0xF800 – 0xFFFF.Part can be secured by programming Lock bits 0through 2 of HSB under DeviceOptionsSECURE:bit 0 (LB0): Parallel programming is disabled.bit 1 (LB1): Parallel program/verify are disabled.bit 2 (LB2): Parallel program/verify/external execution are disabled.On virgin devices bit 2 (LB2) is programmed.In this case the device must be erased prior to programming.Bit 3 4 5 of HSB are reserved bits. Bit 6 7 of HSBare set under DeviceConfigure (X2 & BLJ).Standalone Verify/Compare may fail due to the self running of Flash code.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | PLCC(44) |
| Part Number | AT89C51CC01UA-SLSUM |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51CC01UA-SLSUM (ID=D7h) |
| VppProgram | 65536 |
| ElectricalErase | 5 |