Atmel AT89C51IC2-SLSIM PLCC(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44P | FASM44P |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash. Part can be secured by programming Lock bits 0 through 2 of HSB using Secure command: Bit 0 (LB0): Parallel programming is disabled.Bit 1 (LB1): Parallel program/verify are disabled.Bit 2 (LB2): Parallel program/verify/external execution are disabled.The lock bits are located under Device Options.Bits 7 (X2) 6 (BLJB) 5 (OSC) and 3 (XRAM) of HSB are set under Device Config.Erase returns X2 BLJB OSC and XRAM bits to default values: Unprogrammed programmed unprogrammed unprogrammed. If the security bits are activated Erase has to be executed to clear the bits before programming the device.Erase also sets XAF (Extra Memory) content back to the default values which are Boot Status Byte (0xFF)Software Boot Vector (0xFC) and Software Security Byte (0xFF) found under Device Config.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | PLCC(44) |
| Part Number | AT89C51IC2-SLSIM |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51IC2-SLSIM (ID=D7h) |
| VppProgram | 32768 |
| ElectricalErase | 5 |