Atmel AT89C51RC-24PU DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 8-Bit Microcontroller with 32K Bytes Flash Memory.You must select the appropriate security mode under DEVICE/OPTIONSto operate the secure command.Three lock bits are available in this chip: LB1 LB2 and LB3.LB1′ programs LB1 ‘LB1&LB2’ programs LB1 and LB2and ‘LB1&LB2&LB3’ programs all the three lock bits.If the Secure (Lock Bit Protection) ‘LB2’ or ‘LB3’ is programmedThe Device/CompareReadSumor Verify command will always read back0xFF since verify is disabled.Erase the device (Ingore the Warning) is needed if thelock bits need to be disabled.The lock bits cannot be verified directly. Verification of the lock bitsis achieved by observing that their features are enabled.Please refer to Atmel specification for more information. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | DIP(40) |
| Part Number | AT89C51RC-24PU |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51RC-24PU (ID=5107h) |
| VppProgram | 32768 |
| ElectricalErase | 5 |