Atmel AT89C51RC2-SLSIM PLCC(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44P | FASM44P |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM44P, FSM44PA, FSM84UP, FASM44P, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash.Part can be secured by programming Lock bits 0 through 2 of HSB using Secure command:bit 0 (LB0): Parallel programming is disabled.bit 1 (LB1): Parallel program/verify are disabled.bit 2 (LB2): Parallel program/verify/external execution are disabled.Bit7 6 and 3 of HSB are set under Device Config (X2 BLJB and XRAM).Erasing the device does not clear bits X2 and BLJB. However these bits can be toggled betweenSET and CLEARED by executing a program operation.If the security bits are activated a Chip Erase operation has to be executed before programming the device.XAF content is lost after a chip erase’. XAF content is restored after a program operation. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | PLCC(44) |
| Part Number | AT89C51RC2-SLSIM |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89C51RC2-SLSIM (ID=D7h) |
| VppProgram | 32768 |
| ElectricalErase | 5 |