Atmel AT89LS51-P DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 8-Bit Low-Voltage Microcontroller with 4K Bytes In-System Programmable Flash. Three lock bits are available in this chip: LB1 LB2 and LB3.If LB1 is programmed further programming of device is disabled.If LB2 is programmed read/compare/verify of device is disabled.If LB3 is programmed external execution is disabled. Please refer to device datasheet for more information.Due to hardware limitations verify voltage can only be as high as 5.2V.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | DIP(40) |
| Part Number | AT89LS51-P |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT89LS51-P (ID=6106h) |
| VppProgram | 4096 |
| ElectricalErase | 5 |