Atmel AT90CAN128-16MI QFN(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64MLFA | FASM64MLFA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | WASM64MLFA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) | FSM64MLFA, FASM64MLFA, WASM64MLFA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Buffer address range 0-1FFFFh is for FLASH Memory and 20000h-20FFFh isfor EEPROM Data Memory. Erase will clear the Configuration Bits.You may program the Calibration information to any location in the devicethrough the Device Configure menu. New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.You also can set the Fuse Low Byte Fuse High Byte and Extended Fuse Byte under Device Configure.Please refer to the device specifications for detailed information.COMPARE operation will only verify data read from the device against data in the buffer.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Vcc(program) | 5 |
| Packages | QFN(64) |
| Part Number | AT90CAN128-16MI |
| Package | |
| 8-bit Bytes | |
| ByteWidth | AT90CAN128-16MI (ID=9781h) |
| VppProgram | 135168 |
| ElectricalErase | 5 |