+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Atmel ATMEGA1284P-AU TQFP(44) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: In Data Pattern address [00000h-1FFFFh] is for Flash Memory and [20000h-20FFFh] is for EEPROM Data Memory.The Calibration Byte can be programmed into any address of Flash Memory and EEPROM memory.To make use of Calibration Byte under Device > Configure set CALIBRATION to ENABLE then setCAL BYTE ADDRESS to set address 0h in the signature row high bytefor 8.0MHz internal RC Oscillator Calibrationthen set CALIBRATION ADDRESS (any address within [00000h-21000h]).New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.Fuse Bytes can be set under the Device > Configure menu.For all Fuse bits 1 is unprogrammed 0 is programmed.For details of each Fuse Byte please refer to the device specifications.A secured device must be erased before it can be reprogrammed.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Atmel

Vcc(program)

5

Packages

TQFP(44)

Part Number

ATMEGA1284P-AU

8-bit Bytes
Package
ByteWidth

ATMEGA1284P-AU (ID=9705h)

VppProgram

135168

ElectricalErase

5