+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Atmel ATmega168-15AT QFP(32) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: In the Data Pattern addresses [0000h-3FFFh] are for Flash Memory and addresses [4000h-41FFh] are for EEPROM Data Memory. There is one Calibration Byte residing in the signature row high byte of address 0h for 8.0MHz internal RC Oscillator calibration. To program this Calibration Byte into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to Calibration Byte address 00h. 3)Set CALIBRATION ADDRESS to the memory address [00000h-41FFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Atmel

Vcc(program)

5

Packages

QFP(32)

Part Number

ATmega168-15AT

8-bit Bytes
Package
Bytes

0h-3FFFh; 4000h-41FFh

ByteWidth

ATmega168-15AT (ID=9406h)

VppProgram

16896

ElectricalErase

5