Atmel ATMEGA2564RFR2-ZU QFN(48) Device

Adapters for Automated Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FASMR48QNR	FX4ASMR48QNR, FASMR48QNR	FVE4ASMR48QNR, FVE4ASMR48QNR	FVE4ASMR48QNR

Adapters for Manual Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FSMR48QNR, FASMR48QNR	FX4SMR48QNR, FSMR48QNR, FX4ASMR48QNR, FASMR48QNR, LX4ASMR48QNR (repl.)	FVE4ASMR48QNR, FVE4ASMR48QNR	FVE4ASMR48QNR

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR48QNR, FASMR48QNR	FX4SMR48QNR, FSMR48QNR, FX4ASMR48QNR, FASMR48QNR, LX4ASMR48QNR (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Buffer address range 0-3FFFFh is for FLASH Memory and 40000h-41FFFh is for EEPROM Data Memory.Calibration information may be programmed to any location in the device through the Device Configure menu.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. Fuse Low Byte Fuse High Byteand Extended Fuse Byte can be set under Device Configure menu. The fuses are mapped to the fuse bytes as follows:- Fuse Low Byte: Bit7[CKDIV8 CKOUT SUT1 SUT0 CKSEL3 CKSEL2 CKSEL1 CKSEL0]Bit0- Fuse High Byte: Bit7[OCDEN JTAGEN SPIEN WDTON EESAVE BOOTSZ1 BOOTSZ0 BOOTRST]Bit0- Extended Fuse Byte: Bit7[1 1 1 1 Reserved BODLEVEL2 BODLEVEL1 BODLEVEL0]Bit0.Please refer to the device specifications for detailed information.COMPARE operation will only verify data read from the device against data in the buffer.



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Vcc(program)	3.3
Packages	QFN(48)
Part Number	ATMEGA2564RFR2-ZU
Package
Bytes	0h-1 FFFFh; 2 0000h-2 0FFFh
ByteWidth	ATMEGA2564RFR2-ZU (ID=A803h)
VppProgram	135168
ElectricalErase	3.3