Atmel ATMEGA8515-P DIP(40) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: In the Buffer address [0000h-1FFFh] is for FLASH Program Memory and address [2000h-21FFh] is for EEPROM Data Memory.There are four Calibration Bytes residing in the signature row high byte ofaddresses 0000h 0001h 0002h and 0003h. They are for 1 2 4 and 8 MHz internal RC Oscillator calibrationrespectively. To program one of these four calibration bytes into the memory in Device Configure1)Set CALIBRATION to ENABLE2)Set CAL BYTE ADDRESS to one of the four Calibration Byte addresses [00h-03h].3)Set CALIBRATION ADDRESS to the memory address [0000h-21FFh] you want to program the Calibration Byte.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the device against data in the Buffer.Calibration byte will be ignored during compare regardless of the Calibration settings inDevice Configure menu.