Atmel ATMEGA8535-16MU MLF(44) Device

Adapters for Automated Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FASMR44MLFH, FASM44MLF	FASMR44MLFH, FASM44MLF	FVE4ASMR44MLFH, FVE4ASMR44MLFH	FVE4ASMR44MLFH, LX4ASMR44MLFH

Adapters for Manual Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FSMR44MLFH, FSM44MLF, FASMR44MLFH, FASM44MLF, WASM44MLF (repl.)	FSMR44MLFH, FSM44MLF, FASMR44MLFH, FASM44MLF, WASM44MLF (repl.)	FVE4ASMR44MLFH, FVE4ASMR44MLFH	FVE4ASMR44MLFH, LX4ASMR44MLFH

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR44MLFH, FSM44MLF, FASMR44MLFH, FASM44MLF, WASM44MLF (repl.)	FSMR44MLFH, FSM44MLF, FASMR44MLFH, FASM44MLF, WASM44MLF (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	EE CMOS
Device Size:	96 Microcells
Algorithm Programming method:	Parallel

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 0000_1FFF	0000_0000 – 0000_1FFF
SecSi sector	R/W	N0	0000_0000 – 0000_01FF	0200_0000 – 0000_21FF

Default Algorithm Range	—	—	0000_0000 – 0000_21FF	0000_0000 – 0000_21FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The SecSi sector can be purchased programmed and locked from the factory. There are four Calibration Bytes residing in the signature row high byte of addresses 0000h 0001h 0002h and 0003h. They are for 1 2 4 and 8 MHz internal RC Oscillator calibration
respectively. To program one of these four calibration bytes:
1)Set Device/Configure/CALIBRATION to ENABLE
2)Set Device/Configure/CAL BYTE ADDRESS to one of the four Calibration Byte addresses (00h-03h).
3)Set Device/Configure/MEMORY ADDRESS to the memory address you want to program the Calibration Byte (from 0000h to 21FFh).
New devices may automatically calibrate the RC Oscillator.
Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Vcc(program)	5
Packages	MLF(44)
Part Number	ATMEGA8535-16MU
8-bit Bytes
Package
ByteWidth	ATMEGA8535-16MU (ID=9308h)
VppProgram	8704
ElectricalErase	5