Atmel ATmega88V-15ATZ QFP(32) Device

Adapters for Automated Programmers

8th Gen	9th Gen
FVE4ASMR32TQFB, FVE4ASMR32QPE, FVE4ASMR32QPE, FVE4ASMR32TQFB	FVE4ASMR32QPE, FVE4ASMR32TQFB

Adapters for Manual Programmers

8th Gen	9th Gen
FVE4ASMR32TQFB, FVE4ASMR32QPE, FVE4ASMR32QPE, FVE4ASMR32TQFB	FVE4ASMR32QPE, FVE4ASMR32TQFB

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	8 Bit Microcontroller
Algorithm Programming method:	Parallel

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 0000_1FFF	0000_0000 – 0000_1FFF
EEPROM	R/W/E	N0	0000_2000 – 0000_21FF	0000_2000 – 0000_21FF

Default Algorithm Range	—	—	0000_0000 – 0000_21FF	0000_0000 – 0000_21FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The SecSi sector can be purchased programmed and locked from the factory. There is one Calibration Byte residing in the signature row high byte of address 0h for 8.0MHz internal RC Oscillator calibration. To program this Calibration Byte into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to Calibration Byte address 00h. 3)Set CALIBRATION ADDRESS to the memory address [00000h-21FFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Vcc(program)	5
Packages	QFP(32)
Part Number	ATmega88V-15ATZ
8-bit Bytes
Package
Bytes	0h-1FFFh; 2000h-21FFh
ByteWidth	ATmega88V-15ATZ (ID=930Ah)
VppProgram	8704
ElectricalErase	5