STMicroelectronics M58WR032EB BGA(56) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.) | FX4ASM56BGI (obs.), FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.), WX4ASM56BGI (obs.) (repl.) | WX4ASM56BGI (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXSM56BGI (obs.), FSM56BGI (obs.), FXSM56UBGI (obs.), FSM56UBGI (obs.), FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.) | FX4SM56BGI (obs.), FXSM56BGI (obs.), FSM56BGI (obs.), FXSM56UBGI (obs.), FSM56UBGI (obs.), FX4ASM56BGI (obs.), FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.), WX4ASM56BGI (obs.) (repl.) | WX4ASM56BGI (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FXSM56BGI (obs.), FSM56BGI (obs.), FXSM56UBGI (obs.), FSM56UBGI (obs.), FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.) | FX4SM56BGI (obs.), FXSM56BGI (obs.), FSM56BGI (obs.), FXSM56UBGI (obs.), FSM56UBGI (obs.), FX4ASM56BGI (obs.), FXASM56BGI (obs.), FASM56BGI (obs.), FXASM56UBGI (obs.), FASM56UBGI (obs.), WX4ASM56BGI (obs.) (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This device contains 192 bit Protection Register. All 192 bits are located in the buffer ataddress locations 400000h-400017h. The first 64 bits are pre-programmed by themanufacturer and cannot be modified. Program’ ‘Compare’ and ‘Verify’ operations willignore these bits. The other 128 bits are user programmable. Setting the ‘Lockout Parameter Block 0’option under Device Configure to ENABLE will Permanently Protect the Security Block(buffer address: 0h-1FFFh). Setting the ‘Lockout User Register’ option to ENABLE willLock the User Programmable portion of the Protection Register. Enabling the ‘Lockout User Register’option will also Permanently Freeze the ‘Lockout Parameter Block 0’ existing status. WhenErasing the User Register of the Protection Register the programmer will blank-check the areaand will fail the ‘Erase’ operation if the area is not blank. Performing ‘Erase’ on the User Register orParameter Block 0 will also fail if their respective Protection Register Lock Bits have been ENABLED.Verify after Program is redundant. It can be disabled under Device/Options to save time. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | BGA(56) |
| Part Number | M58WR032EB |
| Set programming | Yes |
| Vcc(program) | 1.8 |
| Package |