STMicroelectronics SPC58NE84E7 LQFP(176) Device
Adapters for Automated Programmers
| 9th Gen |
| FVEG3ASMR176LQPC |
Adapters for Manual Programmers
| 9th Gen |
| FVEG3ASMR176LQPC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 6MB flash |
| Algorithm Programming Method: | Standard Software Driver v1.1.0 |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | BPWin Buffer Byte Address(hex) | Address Space Low Block[ LOWLOCK[5]+LOWLOCK[10]+LOWLOCK[11]]. | R/W/E | Yes | 0060 C000 – 0062 FFFF |
| Address Space Mid Data Flash[ MIDLOCK[0] + MIDLOCK[1] ]. | R/W/E | Yes | 0068 0000 – 0068 7FFF |
| Address Space High Data Flash[ HIGHLOCK[0]+HIGHLOCK[1]+HIGHLOCK[2]+HIGHLOCK[3] ]. | R/W/E | Yes | 0080 0000 – 0083 FFFF |
| Address Space Code Flash[Low Block[[3+4+7]] + A256KLOCK[[0-23]]. | R/W/E | Yes | 00FC 0000 – 015B FFFF |
| Default Algorithm Range | — | — | 0060 C000 – 015B FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: The following device flash blocks are not supported in this algorithm: B0UT [0x0040_0000 to 0x0040_3FFF] – TSLOCK-UTEST (Base Address 0x0040_0000 to 0x0040_3FFF) B1BF [0x0040_4000 to 0x0040_7FFF] -LOWLOCK[0]-For the BAF location in flash. B0TF [0x0040_8000 to 0x0040_BFFF] -Reserved This algorithm supports verify command with CheckSum function from Freescale Standard Software Driver v1.1.0. for C55 Flash. The CheckSum function will perform a 32-bit sum over the specified flash memory range without carry which provides a rapid method for checking data integrity. After a successful Program + Verify operation subsequent stand alone operations may fail if the Customer Data Pattern code executes to modify the Code Flash. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | STMicroelectronics |
|---|---|
| Packages | LQFP(176) |
| Part Number | SPC58NE84E7 |
| Set programming | Yes |
| Vcc(program) | 1.2 |
| Package |