STMicroelectronics STA8089FGTR LAP(56) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR56QFNC, FVE4ASML56QFND |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR56QFNC, FVE4ASML56QFND |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Teseo III MCU |
| Device Size: | 16 Mbit Flash Memory |
| Algorithm Programming Method: | UART protocol used in the TESEO bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 0000_0000 – 001F_FFFF | 0000_0000 – 001F_FFFF |
| Default Algorithm Range | — | — | 0000_0000 – 001F_FFFF | 0000_0000 – 001F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | For programming the code size needs to be defined in Device Configure. It will program the amount of data defined in the code size. | |
| 2. | The programming operation does a CRC32 verification check at the end. | |
| 3. | Serialization is not supported. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2097152 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | LAP(56) |
| Part Number | STA8089FGTR |
| Vcc(program) | 3.3 |
| Package |