STMicroelectronics STM32F031F6P6 TSOP(20) Device

Adapters for Automated Programmers

6th Gen	7th Gen	9th Gen
FASMR20TSX	FX4ASMR20TSX, FASMR20TSX, LX4ASMR20TSX (repl.)	LX4ASMR20TSX

Adapters for Manual Programmers

6th Gen	7th Gen	9th Gen
FASMR20TSX	FX4ASMR20TSX, FASMR20TSX, LX4ASMR20TSX (repl.)	LX4ASMR20TSX

Adapters for Engineering Programmers

6th Gen	7th Gen
FASMR20TSX	FX4ASMR20TSX, FASMR20TSX, LX4ASMR20TSX (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: ARM-based 32-bit MCU with Flash 32KByte Flash Memory is mapped to Data Pattern: 8000000h-8007FFFh IAP area is mapped to Data Pattern: 8000000h-8002FFFh Default device range is set to 8000000h-8007FFFh. 12 Option Bytes are mapped to Data Pattern: 1FFFF800h-1FFFF80Bh These option bytes are not verified after program with this algorithm if Boot1 bit is set to zero or if device is set to read protection level 1 or level 2.

Data Pattern Address	Bits [15:8]	Bits[7:0]
1FFFF800h	nRDP	RDP
1FFFF802h	nUSER	USER
1FFFF804h	nData0	Data0
1FFFF806h	nData1	Data1
1FFFF808h	nWRP0	WRP0
1FFFF80Ah	nWRP1	WRP1

Selecting Erase operation will do global erase including the IAP area and option bytes. If RDP protection is set to level 1(None AAh Non CCh) the main Flash memory and the backup registers (RTC_BKPxR in the RTC) are totally inaccessible. If RDP protection is set to level 2(CCh) device debug interface is disabled. Any operation on device fails. If BOOT1 option bit is set to ‘0’ device will not be accessible by this algorithm. Stand alone operation might fail if device was programmed with executable code. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	536868876
Manufacturer	STMicroelectronics
Packages	TSOP(20)
Part Number	STM32F031F6P6
Set programming	Yes
Vcc(program)	3.3
Package