STMicroelectronics STM8L101K3T6 QFP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR32LQFT | FX4ASMR32LQFT, FASMR32LQFT, LX4ASMR32LQFT (repl.) | LX4ASMR32LQFT |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR32LQFT, FASMR32LQFT | FX4SMR32LQFT, FSMR32LQFT, FX4ASMR32LQFT, FASMR32LQFT, LX4ASMR32LQFT (repl.) | LX4ASMR32LQFT |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR32LQFT, FASMR32LQFT | FX4SMR32LQFT, FSMR32LQFT, FX4ASMR32LQFT, FASMR32LQFT, LX4ASMR32LQFT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In order to program STMicroelectronics STM8L101K3T6 the FX4ASMR32LQFT/FASMR32LQFT module needs to be prepared for it using the below steps:1) Select BP Microsystems ASMR32LQFT_STM8L101K3T62) Follow the device selection instructions to prepare the module.Preparation steps only need to be executed the first time you use the module with this STMicroelectronics STM8L101K3T6 device.
| Device Type: | Microcontroller |
| Device Size: | 2Kbyte EEPROM and 8KByte Flash Memory |
| Algorithm Programming Method: | Bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Option Bytes | R/W/E | Yes | 4800-483F | 4800-483F |
| Flash Memory | R/W/E | Yes | 8000-97FF | 8000-97FF |
| EEPROM | R/W/E | Yes | 9800-9FFF | 9800-9FFF |
| Default Algorithm Range | — | — | 4800-9FFF | 4800-9FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. ROP byte are ignored during program and verify operation. Select SECURE operation to enable read protection. For a read protected device Erase operation clears Read-Out protection and erases all memory. Option bytes contain configurations for device hardware features and memory protection for the device. Programming invalid data to Option bytes area can cause programming failure. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 40960 |
|---|---|
| Manufacturer | STMicroelectronics |
| Packages | QFP(32) |
| Part Number | STM8L101K3T6 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |