Adapters for Automated Programmers
6th Gen | 7th Gen |
FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM | FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM |
Adapters for Manual Programmers
6th Gen | 7th Gen |
FSM80QD, FSM80QNTN, FSM80QNTB, FSM80QNTA, FSM80QNTH, FSM80QNT, FSM80QNTM, FSM80QPJM, FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM | FSM80QD, FSM80QNTN, FSM80QNTB, FSM80QNTA, FSM80QNTH, FSM80QNT, FSM80QNTM, FSM80QPJM, FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM80QD, FSM80QNTN, FSM80QNTB, FSM80QNTA, FSM80QNTH, FSM80QNT, FSM80QNTM, FSM80QPJM, FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM | FSM80QD, FSM80QNTN, FSM80QNTB, FSM80QNTA, FSM80QNTH, FSM80QNT, FSM80QNTM, FSM80QPJM, FASM80QD, FASM80QNTN, FASM80QNTB, FASM80QNTA, FASM80QNTH, FASM80QNT, FASM80QNTM, FASM80QPJM |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Make sure that the Default buffer value’is set to 00h before loading data patterns.For correct checksum calculationin the buffer addresses [340CFh] [340E0h-340E1h] should be set to 00h;in the device run Device/Sum command.Before load the buffer please set the ‘Automatic lowest address to load’under Buffer/Options to ‘DISABLE’.Erase before programming and Verification after programming are redundant operations. To disable them set ‘Verify after programming’ to ‘NONE’and set ‘Erase before programming’ to ‘DISABLE’. ‘Check electronic identifiers’must be set to ENABLE. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
8-bit Bytes | 213250 |
---|---|
Manufacturer | STMicroelectronics |
Packages | QFP(80) |
Part Number | uPSD3433EV-U |
Set programming | Yes |
Vcc(program) | 3.3 |
Package |