SUMMIT Microelectronics SMT4004AF QFP(48) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Quad Trakking Power Supply Manager.In the Buffer Configuration Registers (32 bytes) are mapped to 00h-1FhEEPROM (256 bytes) is mapped to 20h-11Fh.Fault Status Register (1Dh 1Eh and 1Fh) values under Device Configure menu must be setto zero during Programming. A Read on the device will give the current status of the Fault StatusRegisters. Bit 5 of Register 18h Bit 7 of Register 05h and Bit 6 of Register 1Bhare reserved bits and should be set to zero. Bits 7 and 6 of Register 18h are read only.They are ignored during Program and Verify but will cause an error during Compareif the value differs from that of the device.The last 48-bytes in the EEPROM array (Buffer locations F0h-11Fh)are reserved for test purpose they are skipped during Program Compare and Verify.Please refer to SMT4004A data sheet for more information.