Texas Instruments CC2530F256RHAT QFN(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR40QFNF | FX4ASMR40QFNF, FASMR40QFNF, LX4ASMR40QFNF (repl.) | LX4ASMR40QFNF |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR40QFNF, FASMR40QFNF | FX4SMR40QFNF, FSMR40QFNF, FX4ASMR40QFNF, FASMR40QFNF, LX4ASMR40QFNF (repl.) | LX4ASMR40QFNF |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR40QFNF, FASMR40QFNF | FX4SMR40QFNF, FSMR40QFNF, FX4ASMR40QFNF, FASMR40QFNF, LX4ASMR40QFNF (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with 256K bytes flash memory.Flash Memory is mapped to the range [00000h-3FFFFh] in the buffer andInformation Page is mapped to the range [40000h-407FFh]. The Information Pageis read-only and cannot be programmed.The PAGELOCK bits are mapped to [3FFF0h-3FFFF] with each bitrepresenting 1 page. Each page contains 2K bytes of data. These bits can bemodified in Device configure and will be mapped directly to the buffer.The DBGLOCK bit is mapped to the last bit of the location [3FFFFh]. To disable the DebugCommand you must select the appropriate options AND ENABLE Secure. Thefinal page mapped to [3F800h-3FFFFh] will not be verified.Once Secured only valid commands specified by the datasheet may be performed.Erase may be used to clear DBGLOCK and PAGELOCK bits.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 264192 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | QFN(40) |
| Part Number | CC2530F256RHAT |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package |