Texas Instruments CDCE62005-RGZ PQFP(48) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Five Output Clock Synthesizer Jitter Cleaner with Integrated Wide Range Dual VCO. 8 Configuration registers are available for EEPROM. They are mapped to the buffer as follow: ——————————————————— Buffer [00][01][02][03] Buffer [04][05][06][07] Register0 [XX][XX][XX][X0] Register1 [XX][XX][XX][X1] Buffer [08][09][0A][0B] Buffer [0C][0D][0E][0F] Register2 [XX][XX][XX][X2] Register3 [XX][XX][XX][X3] Buffer [10][11][12][13] Buffer [14][15][16][17] Register4 [XX][XX][XX][X4] Register5 [XX][XX][XX][X5] Buffer [18][19][1A][1B] Buffer [1C][1D][1E][1F] Register6 [XX][XX][XX][X6] Register7 [XX][XX][XX][X7] ——————————————————— X = Configuration bits in hex. Last 4 bits of every 32-Bit word must be a constant that corresponds to the register address. Otherwise Program will fail. Compare operation will skip location 1Ch. EEPROM Status bit in Register11 will always verify against ‘1’. EEPROM Unlock bit in Register11 will always verify against value set in Device Config. TI GUI Checksum is available under Device -> TI_GUI_Checksum. ‘