Texas Instruments LM3S9B95-QC QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM100LQFJ | FX2ASM100LQFJ, FASM100LQFJ |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM100LQFJ, FASM100LQFJ | FX2SM100LQFJ, FSM100LQFJ, FX2ASM100LQFJ, FASM100LQFJ, LX2ASM100LQFJ (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100LQFJ, FASM100LQFJ | FX2SM100LQFJ, FSM100LQFJ, FX2ASM100LQFJ, FASM100LQFJ, LX2ASM100LQFJ (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with 256KB of flash memory.Flash-protection is currently not supported. If the device is programmed withcode that disables the JTAG port the device may not be accessible.Only one of the following ranges is valid for device operations:- 00000000h-0003FFFFh for flash only.- 400FE1E0h-400FE1EFh for USER_REGn only.- 00000000h-400FE1EFh for flash and USER_REGn.Other Nonvolatile Registers are supported under Device > Configure and programmed by Secure operation.Secure must be selected to program the Nonvolatile Registers.Once BOOTCFG[1:0] is programmed to anything other than binary ’10’ thedevice is no longer accessible and Nonvolatile Registers will not be verified.All Nonvolatile Registers are one time programmable.The MSBs of USER_REGn and BOOTCFG registers are not programmable by the user.It must be set to ‘1’ for virgin devices. It will automatically be set to ‘0’ oncethe register is programmed.Secured and Unsecured batches must not be mixed. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 1074782704 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | QFP(100) |
| Part Number | LM3S9B95-QC |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |