Texas Instruments MCU60T256FD(Special Options) QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) | FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM100QHI, FSM100QHJ, FSM100TQIA, FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FSM100TQK, FSM100TQB, FSM100TQD, FSM100QHL, FSM100QHC, FSM100QHB, FSM100QHK, FSM100TQA, FSM100TQF, FSM100TQI, FSM100QHG, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) | FSM100QHI, FSM100QHJ, FSM100TQIA, FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FSM100TQK, FSM100TQB, FSM100TQD, FSM100QHL, FSM100QHC, FSM100QHB, FSM100QHK, FSM100TQA, FSM100TQF, FSM100TQI, FSM100QHG, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100QHI, FSM100QHJ, FSM100TQIA, FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FSM100TQK, FSM100TQB, FSM100TQD, FSM100QHL, FSM100QHC, FSM100QHB, FSM100QHK, FSM100TQA, FSM100TQF, FSM100TQI, FSM100QHG, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) | FSM100QHI, FSM100QHJ, FSM100TQIA, FASM100QHK, FASM100QHJ, FASM100TQA, FASM100TQF, FASM100TQI, FASM100TQIA, FSM100TQK, FSM100TQB, FSM100TQD, FSM100QHL, FSM100QHC, FSM100QHB, FSM100QHK, FSM100TQA, FSM100TQF, FSM100TQI, FSM100QHG, FASM100TQK, FASM100TQB, FASM100TQD, FASM100QHL, FASM100QHC, FASM100QHB, FASM100QHI, FASM100TQIB, FASM100QHG, FASM100TQH (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm supports a Program Erase Cycle (PEC) counter Version Number and User ID whichwill be written to the last 16 bytes of the program flash. This is located at device address1FFF8h-1FFFFh ( 3FFF0h-3FFFFh buffer address ). The User ID and enabling programming of thisfeature are located in the Device Configure Options. If the loaded Data Patterne contains anydata at buffer location 3FFF0h-3FFFFh ( some value other than FFh ) this feature will beautomatically disabled no matter how the enable option is set.This device has the following memory map (Half Word addresses):Program Flash 00000h-1FFFFh Parity memory 20000h-21FFFh.Make sure the Byte Order’ under ‘Device Options’ is set to ‘MSB=0LSB=1’. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Texas Instruments |
|---|---|
| Packages | QFP(100) |
| Part Number | MCU60T256FD |
| Vcc(program) | 3.3 |
| Package |