Texas Instruments MSC1213Y5PAG QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FXASM64QBC, FASM64QBC | FXASM64QBC, FASM64QBC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FXSM64QBC, FSM64QBC, FXASM64QBC, FASM64QBC, WXASM64QBC (repl.) | FXSM64QBC, FSM64QBC, FXASM64QBC, FASM64QBC, WXASM64QBC (repl.) | WXASM64QBC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FXSM64QBC, FSM64QBC, FXASM64QBC, FASM64QBC, WXASM64QBC (repl.) | FXSM64QBC, FSM64QBC, FXASM64QBC, FASM64QBC, WXASM64QBC (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the Buffer addresses [0000h-7FFFh] is for 32K Byte FLASH Memoryand addresses [8000h-807Fh] is for 128 Byte Configuration Memory.Addresses [8070h-8079h] of Configuration Memory is read-only and will notbe programmed in this algorithm. HCR1 (hardware configuration register 1)is mapped into Buffer address 807Eh and HCR0 (hardware configuration register 0)is mapped into Buffer address 807Fh. Bit 7 of HCR0 is security Bit once set to 0program or read FLASH Memory cannot be accessed. However chip erase can clear this bit to 1.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 32896 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | QFP(64) |
| Part Number | MSC1213Y5PAG |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |