Texas Instruments MSP430F135 QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.), FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQT, FSM64PQTX, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQT, FASM64PQTX, FASM64PQTA, LASMR64QPT (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with Flash EPROM.Memory organization:Information Memory:0800h-087Fh (Device Address 16-bit)1000h-10FFh (Buffer Address 8-bit)Main Memory:6000h-7FFFh (Device Address 16-bit)C000h-FFFFh (Buffer Address 8-bit)Buffer locations 0000h-0FFFh(device location 0000h-07FFh) and1100h-BFFFh(device location 0880h-5FFFh) are reserved and must contain data FFh.Each segment of the Information Memory and Main Memory may be Erased and Programmed separately.To access the Information Memory only set the Device Configure->Range between 0800h-087Fh (device address).Information Memory data will be displayed in buffer locations 1000h-10FFh.To access the Main Memory only set the Device Configure->Range between 6000h-7FFFh (device address).Main Memory data will be displayed in buffer locations C000h-FFFFh.To access both Information and Main Memory set the range as 0000h-7FFFh (device address).
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Texas Instruments |
|---|---|
| Packages | QFP(64) |
| Part Number | MSP430F135 |
| Vcc(program) | 3 |
| Package |