Texas Instruments MSP430G2403IRHB32T QFN(32) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with Flash EPROM. Memory organization: Information Memory: 0800h-087Fh (Device Address 16-bit) 1000h-10FFh (Buffer Address 8-bit) Main Memory: 7000h-7FFFh (Device Address 16-bit) E000h-FFFFh (Buffer Address 8-bit) Buffer locations 0000h-0FFFh(device location 0000h-07FFh) and 1100h-DFFFh(device location 0880h-6FFFh) are reserved and must contain data FFh. Each segment of the Information Memory and Main Memory may be Erased and Programmed separately. To access the Information Memory only set the Device Configure->Range between 0800h-087Fh (device address). Information Memory data will be displayed in buffer locations 1000h-10FFh. To access the Main Memory only set the Device Configure->Range between 7000h-7FFFh (device address). Main Memory data will be displayed in buffer locations E000h-FFFFh. To access both Information and Main Memory set the range as 0000h-7FFFh (device address). To overwrite Calibration values at buffer location 10C0h-10FFh select in Device Configure. Otherwise by default factory calibration values are preserved. Secured device cannot be accessed any more.