Texas Instruments PRM57L843ZWTT BGA(337) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR337BGA | FX2ASMR337BGA, FASMR337BGA, LX2ASMR337BGA (repl.) | LX2ASMR337BGA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR337BGA, FASMR337BGA | FX2SMR337BGA, FSMR337BGA, FX2ASMR337BGA, FASMR337BGA, LX2ASMR337BGA (repl.) | LX2ASMR337BGA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR337BGA, FASMR337BGA | FX2SMR337BGA, FSMR337BGA, FX2ASMR337BGA, FASMR337BGA, LX2ASMR337BGA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM Cortex-R5F 32-bit MCU |
| Device Size: | 4 MByte Flash Memory |
| Algorithm Programming Method: | Parallel protocol with bootloader |
Memory Organization:
| Memory Type |
Attributes(*) |
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Bank 0 | R/W/E | Yes | 0000_0000 – 001F_FFFF | 0000_0000 – 001F_FFFF |
| Flash Bank 1 | R/W/E | Yes | 0020_0000 – 003F_FFFF | 0020_0000 – 003F_FFFF |
| Default Algorithm Range | — | — | 0000_0000 – 003F_FFFF | 0000_0000 – 003F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations:
| 1. | The device range can be selected by Flash Sector. Please see the device datasheet for the addresses for each sector. | |
| 2. | Erasing is done by bank so if any sector from a bank is included the entire bank will be erased. | |
| 3. | Erased devices will not readback FFh due to the ECC code. | |
| 4. | Autorange is enabled by default and will skip blank checking empty Data Pattern regions. To avoid excluding blank regions during program and verify autorange must be disabled. | |
| 5. | Performing Compare after programming the device with autorange enabled may indicate mismatches in unprogrammed areas due to ECC code. | |
| 6. | Sector protection and other special features are not currently supported. | |
Supported Socket Module [FX4ASMR337BGA] is updated to Revision B. Revision B of the module must be used with this algorithm. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 4194304 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | BGA(337) |
| Part Number | PRM57L843ZWTT |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |