Texas Instruments TM4E129BNCZAD BGA(361) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with 1024KB of flash memory and 6KB of EEPROM.EEPROM is is currently not supported.Flash and EEPROM protection is currently not supported. If the device is programmed withcode that disables the JTAG port the device may not be accessible.Only one of the following ranges is valid for device operations:- 00000000h-000FFFFFh for flash only.- 400FE1E0h-400FE1EFh for USER_REGn only.- 00000000h-400FE1EFh for flash and USER_REGn.BOOTCFG Register (mapped to buffer location 400FE1D0h-400FE1DFh) is one time programmable and supported under Device > Settings and programmed by Secure operation.Secure must be selected to program this Register.Once BOOTCFG[1:0] is programmed to anything other than binary ’10’ the device is no longer accessible.If the Flash at address 00000004h programmed with a valid reset vector value and the BOOTCFG register does not indicate the boot loaderthe boot sequence causes the stack pointer/reset vector fetch from Flash hence the device is no longer accessible by this algorithm.Programmed device cannot be reprogrammed by this algorithm and standalone operations may fail if dataprogrammed to the device affects the device booting process.Secured and Unsecured batches must not be mixed.On Data Pattern Information window the size calculated is based on the start address 0h to the end address 400FE1DFh for the BOOTCFG Register. ‘