Texas Instruments TM4E1G31H6ZRBI BGA(169) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with 256KB of flash memory and 2KB of EEPROM.Flash and EEPROM protection is currently not supported. If the device is programmed withcode that disables the JTAG port the device may not be accessible.If data programmed to address 00000004h is not FFFFFFFFh the device will boot from the flash memory andwill not be accessible by this algorithm.Only one of the following ranges is valid for device operations:- 00000000h-0003FFFFh for flash only.- 00040000h-000407FFh for EEPROM only.- 400FE1E0h-400FE1EFh for USER_REGn only.- 00000000h-400FE1EFh for flash EEPROM and USER_REGn.Programmed device cannot be reprogrammed by this algorithm and standalone operations may fail if dataprogrammed to the device affects the device booting process.Other Nonvolatile Registers are supported under Device > Configure and programmed by Secure operation.Secure must be selected to program the Nonvolatile Registers.Once BOOTCFG[1:0] is programmed to anything other than binary ’10’ thedevice is no longer accessible and Nonvolatile Registers will not be verified.All Nonvolatile Registers are one time programmable.The MSBs of USER_REGn and BOOTCFG registers are not programmable by the user.It must be set to ‘1’ for virgin devices. It will automatically be set to ‘0’ oncethe register is programmed.Secured and Unsecured batches must not be mixed. ‘