Analog Devices ADM1166ASUZ TQFP(48) Device

Adapters for Automated Programmers

6th Gen	7th Gen	9th Gen
FASMR48TQRB	FX4ASMR48TQRB, FASMR48TQRB, LX4ASMR48TQRB (repl.)	LX4ASMR48TQRB

Adapters for Manual Programmers

6th Gen	7th Gen	9th Gen
FSMR48TQRB, FASMR48TQRB	FX4SMR48TQRB, FSMR48TQRB, FX4ASMR48TQRB, FASMR48TQRB, LX4ASMR48TQRB (repl.)	LX4ASMR48TQRB

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR48TQRB, FASMR48TQRB	FX4SMR48TQRB, FSMR48TQRB, FX4ASMR48TQRB, FASMR48TQRB, LX4ASMR48TQRB (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Serial EEPROM
Device Size:	256 Bytes

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
EEPROM Location 1	R/W/E	Yes	0000_F800 – 0000_F89F	0000_F800 – 0000_F89F
EEPROM Location 2	R/W/E	No	0000_F900 – 0000_FBFF	0000_F900 – 0000_FBFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Super Sequencer with Margining Control containing Serial EEPROM. Bit 0 of location F893h must be 0. The EEPROM is mapped to Buffer locations F800h-F89Fh and F900h-FBFFh. An EEPROM location must be blank before it can be written to. If it contains data it must first be erased.Program Verify and Read operations display the ADI Checksum as calculated from the data file. There are two ADI checksums displayed for these operations. 1. The ADI Checksum (SW version 4.0.0 and older) matches the Master checksum generated by the ADI SW version 4.0.0 and older. 2. The ADI Checksum (SW version 4.0.1 and newer) matches the Master checksum generated by the ADI SW version 4.0.1 and newer.The software revision and checksum values are included in the hex file generated by ADI software.Please refer to the hex file to match the SW versionand corresponding master checksum with the ADI checksum displayed by BPWin.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Analog Devices
Packages	TQFP(48)
Part Number	ADM1166ASUZ
Vcc(program)	5
Package
8-bit Bytes