Analog Devices ADM1266ACPZ-R7 (Custom01) LAP(64) Device

Adapters for Automated Programmers

8th Gen

FVE4ASMR64QNJ, FVE4ASMR64QNJ

Adapters for Manual Programmers

8th Gen

FVE4ASMR64QNJ, FVE4ASMR64QNJ

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: This is a custom algorithm for devices using firmware file v1.11.3_b0 and newer.Device Information:

Device Type:	Microcontroller
Algorithm Programming Method:	PMBus

Memory Organization:

*Section*	**Attributes^()***	Included in default Range (Y/N)	*DUT Physical Byte Address (hex)(if this area is selected/Activated)*	*BPWin Buffer Byte Address (hex)*
Firmware	W/E	Yes	N/A	0000_0000h – 000F_FFFFh
Configuration Data	W/E	Yes	N/A	0010_0000h – 001F_FFFFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: This algorithm will parse a hex file generated by Analog Devices tools. 1. When loading the data pattern load both the firmware and configuration files as binary. 2. Do not clear the buffer between loading of the two files. 3. Firmware file needs to be loaded at 0000_0000h – 000F_FFFFh and configuration file needs to be loaded at 0010_0000h – 001F_FFFFh. 4. Configuration data can be programmed to either Main and/or Backup Memory. This can be selected under Device-> Settings. 5. Serialization is not supported for this device. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Analog Devices
Packages	LAP(64)
Part Number	ADM1266ACPZ-R7
Set programming	Yes
Vcc(program)	3.3
Package
8-bit Bytes